Docs.NodezillaIni History

Hide minor edits - Show changes to markup

June 02, 2010, at 10:24 AM by 127.0.0.1
Changed line 13 from:

TCPPORT Sets the listening TCP port for the Network Agent. Default to 4242.

to:

TCPPORT Sets the listening TCP port for the Network Agent. Default to 4233.

Changed lines 16-17 from:

UDPPORT Sets the port where periodical UDP broadcasts will be sent. This is only used in LAN environment. Default is 4242, put 0 here to disable UDP broadcasts.

to:

UDPPORT Sets the port where periodical UDP broadcasts will be sent. This is only used in LAN environment. Default is 4232, put 4232 here to disable UDP broadcasts.

Restore
July 13, 2008, at 01:29 PM by Node Master
Changed lines 25-26 from:

MAXRELAYSOCKET Maximum number of simultaneous sockets allowed to relay nodes behind NAT/Firewall

to:

MAXRELAYNODES Maximum number of simultaneous nodes behind NAT/Firewall (not sockets) allowed to be relayed. Default is 7.

Restore
April 06, 2008, at 02:12 PM by Node Master
Added lines 7-8:

The ; character is the comment character, erverything after it will be ignored.

Restore
October 30, 2007, at 09:07 PM by Node Master
Added lines 23-24:

MAXRELAYSOCKET Maximum number of simultaneous sockets allowed to relay nodes behind NAT/Firewall

Restore
April 10, 2006, at 08:01 PM by 82.233.25.164
Changed lines 74-75 from:

Default is 384 (Errors+Criticals)

to:

Default is 400 (Errors+Criticals+Notice)

Restore
April 07, 2006, at 12:45 PM by Node Master
Changed line 70 from:
  • Conditions that are not error conditions, but that may require special handling : 16
to:
  • Notice : 16
Changed lines 74-75 from:

Default is 392 (Infos+Errors+Criticals)

to:

Default is 384 (Errors+Criticals)

Restore
December 22, 2005, at 07:47 AM by Node Master
Changed lines 16-17 from:

CONNECTTIMEOUT Delay in seconds for inactive inbound connections before being closed by the Network Agent. Default is 180.

to:

CONNECTTIMEOUT Delay in seconds for inactive inbound connections before being closed by the Network Agent. Default is 600.

Added lines 39-40:

NBRSENDTHREADS Number of threads used to send data. Do not change unless you know what you are doing. Default is 4.

Restore
June 07, 2005, at 02:12 PM by Node Master
Changed lines 3-4 from:

This file is in the Network Agent install directoy and contains user settings. This is where you put some configuration options related to the core EVL engine.

to:

This file is in the Network Agent install directoy and contains user settings. This is where you put some configuration options related to the core EVL engine.

Restore
June 07, 2005, at 10:10 AM by Node Master
Changed lines 1-4 from:

nodezilla.ini file

The nodezilla.ini file is where you put some configuration options related to the core EVL engine.

to:

The nodezilla.ini file

This file is in the Network Agent install directoy and contains user settings. This is where you put some configuration options related to the core EVL engine.

Restore
June 07, 2005, at 10:05 AM by Node Master
Changed line 11 from:

TCPPORT Sets the listening port for the Network Agent. Default to 4242.

to:

TCPPORT Sets the listening TCP port for the Network Agent. Default to 4242.

Added lines 42-49:

This section holds settings for the client side API engine (CORBA based).

CORBA_BIND In case of multi-homed machine, sets here the IP of the adapter you want the Client API to use. Default is localhost, this cause the client API to be accessed only locally from your desktop and not remotly.

NOTE: You MUST change this setting to be able to use a client running on a different machine than your Network Agent.

CORBA_PORT TCP port used for client communications. Default is 2525.

Changed lines 51-76 from:

Section [UTIL]

to:

This section holds configuration details for the File Sharing module built-in NZ.

CACHESIZE Size for the cache (in KB). The higher, the more and the faster you will get download credits. Default is 150000.

RESCANDELAY Delay in seconds between two scans of shared directories for changes. Default is 7200.

Section [UTIL]

Some housekeeping settings.

VERBOSE Make logs a little bit verbose. Allowed values are 0 and 1. Default is 0.

LOGLEVEL Selects what kind of log messages are writtent to the log file. The value for this setting is a binary OR of the following bits:

  • Debug messages : 4
  • Informational messages : 8
  • Conditions that are not error conditions, but that may require special handling : 16
  • Warning messages : 32
  • Error messages : 128
  • Critical conditions : 256.

Default is 392 (Infos+Errors+Criticals)

LOGFILE Name of the log file (stored in the PRIVATEDATADIR directory). Default is master.log.

PLUGINSDIR Additional directories to look for plugins. Default is empty.

Restore
June 07, 2005, at 09:43 AM by Node Master
Added lines 1-43:

nodezilla.ini file

The nodezilla.ini file is where you put some configuration options related to the core EVL engine.

It's divided into sections enclosed by [ and ] .

Section [KERNEL]

This section holds kernel level settings for the Network Agent.

TCPPORT Sets the listening port for the Network Agent. Default to 4242.

NOTE: This port should be open for inbound connections in your firewall or NAT setup. Additionnaly, as other users may have different ports set here, your firewall should be open outbound on any ports for the nodezilla process.

UDPPORT Sets the port where periodical UDP broadcasts will be sent. This is only used in LAN environment. Default is 4242, put 0 here to disable UDP broadcasts.

CONNECTTIMEOUT Delay in seconds for inactive inbound connections before being closed by the Network Agent. Default is 180.

BINDIP In case of multi-homed machine, sets here the IP of the adapter you want the Network Agent to use. Use the * joker to specify "all available adapter". Default is *

MAXNBRCONNECT Maximum number of simultaneous persistant sockets open for outbound traffic. Default is 100.

NOTE: This count is for outbound sockets only. Incoming connections are not counted.

COMPRESSIONLEVEL Compression level on send. Goes from 0 to 9, higher is heavier on CPU. Default is 3.

BANDWIDTH_LIMIT_UP Bandwidth limit for upload in Kbits/s (use 0 for no limit). Default is 0.

BANDWIDTH_LIMIT_DN Bandwidth limit for download in Kbits/s (use 0 for no limit). Default is 0.

PRIVATEDATADIR Directory (absolute or relative to the directory containing nodezilla.exe) where the Network Agent will store his private data (RSA keys, application modules cache ...). Default is evl_data

PRIVATEKEYLENGTH Length of the RSA key. Minimum accepted is 4096, default is 4096.

NOTE: You will not be able to connect to other nodes if your keylength is less than 4096 bits.

ROOTCAFILE Name of the file (absolute or relative to the directory containing nodezilla.exe) holding the ROOT Certificate Authority. Default is EVLRootCA?.cer.

NOTE: It is highky unrecommended to change this certificate in the public version of Nodezilla, as it will cut you from the auto-update and remote-configuration process and eventually from the whole grid.

NBRSERVICETHREADS Number of service threads to handle queries. Do not change unless you know what you are doing. Default is 5.

TELECONF_DIR Directory where node stores configuration info fetched from the grid. Default is teleconf.

Section [CLIENT_API]

Section [FILESHARE]

Section [UTIL]

Restore